AC90 ISO-BX (–40°C) XLPE 600 Volts 90°C Copper

 

 

 

 

 

Solid copper circuit conductors, with low temperature (RW90) insulation , two additional solid copper bonding conductors (one bare, one covered with green) twisted assembly wrapped and covered with interlocked aluminum tape armour. Rated 600 volts. CSA Spec C22.2 No. 51-M89.

Applications:

ECS
Catalogue
Number

Conductor

Bonding Wire AWG Size

Isolated 

Ground Wire AWG Size

Insulation
(inches)

Ampacity

(30°C Ambient)
(amps)

Nominal
O.D.
(inches)

Total
Weight
(lbs/km)

No.

AWG
Size

Stranding

ACIG14-02-99 2 14 Solid 14 14 .030 15 0.491 374
ACIG14-03-99 3 14 Solid 14 14 .030 15 0.528 442
ACIG12-02-99 2 12 Solid 12 12 .030 20 0.531 436
ACIG12-03-99 3 12 Solid 12 12 .030 20 0.573 492
ACIG10-02-99 2 10 Solid 10 10  .045 30 0.580 679
ACIG10-03-99 3 10 Solid 10 10 .045 30 0.630 820

 

Applications:

For open and concealed wiring in dry locations only.
This cable is recommended for installations where an isolated ground is required (i.e. computer and other electronic equipment or special installations).
Minimum recommended installation temperature minus 40°C (with suitable handling procedures).
Maximum conductor temperature 90°C.