Our Products

We offer an incredibly diverse product selection.

Submersible Pump Cable 600 Volts 60ºC

Pump Cable - Submersible Pump Cable 600 Volts 60ºC

Solid or stranded bare copper conductors; two or three individual TWU-40 conductors; twisted with a Green Bonding cable. Extra thickness of FT1 rated flame retardant, low temperature, moisture resistant PVC insulation, coloured for identification. Rated 600 volts. .For use with submersible pumps and irrigation equipment. For wiring only between equipment located at water wellheads and motors of submersible pumps installed in deep wells.

  • Minimum recommended installation temperature: - 40 ° C (with suitable handling procedures)
  • Maximum conductor temperature: 60 ° C.
Click to view spec sheet: Pump Cable
ECS Catalogue Number CONDUCTOR APPROX. OD APPROX. WEIGHT PUT-UPS (Length)
AWG OR MCM NO. (mm) (inches) (kg/km) lbs/1,000ft
PMP14-04
14 4 12 .473 169 122 PLEASE CALL
PMP12-03F
12 3 11.5 .465 172 124 PLEASE CALL
PMP12-04F
12 4 13 .521 229 165 PLEASE CALL
PMP10-04F
10 4 14.5 .579 318 229 PLEASE CALL
PMP08-04
8 4 17.7 .707 468 338 PLEASE CALL

Printing Instructions

Close

For best results in printing our product spec sheets, we request that you set your printer to Landscape Orientation.

To proceed with printing this page, click the YES button below.