Our Products

We offer an incredibly diverse product selection.

Standard Masonry Boxes - Standard Masonry Boxes

Masonry boxes are used for the flush installation of devices in masonry construction. Two, three and four-gang masonry boxes allow for the installation of partitions. The following partitions are available: Partition MBS-P is designed for use with MBS-2, MBS-3 and MBS-4 boxes. Partition MBD-P is designed for use with MBD-2, MBD- 3 and MBD-4 boxes. 

All Hubbell boxes are CSA certified, unless otherwise stated, and meet the requirements of the Canadian Electrical Code. File numbers are available upon request.

Click to view spec sheet: MASONRY BOXES - 2-1/2” DEEP 14.0 CUBIC INCHES PER GANG
ECS Catalogue Number DESCRIPTION Width Height Concentric Knockouts
(inches) (inches) 1/2 (16), 3/4 (21), 1 (27) 1/2 (16), 3/4 (21)
HUB-MBS1K
MASONRY BOX 2 3-3/4 1 7
MASONRY BOXES - 2-1/2” DEEP 14.0 CUBIC INCHES PER GANG
Click to view spec sheet: MASONRY BOXES - 3-1/2” DEEP 21.0 CUBIC INCHES, 344 ML
ECS Catalogue Number DESCRIPTION Width Height 1/2 (16), 3/4 (21), 1 (27) 1/2 (16), 3/4 (21)
(inches) (inches)
HUB-MBD1K
MASONRY BOX 2" 3-3/4" 1 9
HUB-MBD2K
2-GANG MASONRY BOX 2" 3-3/4" 1 15
HUB-MBD3K
3-GANG MASONRY BOX 2" 3-3/4" 1 21
HUB-MBD4K
4-GANG MASONRY BOX 2" 3-3/4" 1 27
HUB-MBD5K
5-GANG MASONRY BOX 2" 3-3/4" 1 33
HUB-MBD6K
6-GANG MASONRY BOX 2" 3-3/4" 1 39
HUB-MBDP
PARTITION - 3-3/4" - -
MASONRY BOXES - 3-1/2” DEEP 21.0 CUBIC INCHES, 344 ML

Printing Instructions

Close

For best results in printing our product spec sheets, we request that you set your printer to Landscape Orientation.

To proceed with printing this page, click the YES button below.